******************************************************************************************

    Release Notes for Vigor2700Ge/Vigor2700e

    Firmware Version    : 2.6.3
    Release Date        : Sep, 22, 2006

    Applied Models      : Vigor2700Ge, Vigor2700e


******************************************************************************************

[Release Firmware]

    (1)For Annex A Model,
        1> "v2k7ge_a_263.xxx"  is used for modem code 121201.  (Standard)
        2> "v2k7ge_a1_263.xxx" is used for modem code 113111.      
        3> "v2k7ge_a2_263.xxx" is used for modem code 131701.
           (Recommanded for UK)
        4> "v2k7ge_a3_263.xxx" is used for modem code 1401201.
           (Recommanded for USA or for G.lite environment) 
                 
    (2)For Annex B Model,
	1> "v2k7ge_b2_263.xxx"  is used for modem code 1211202.	
	2> "v2k7ge_b1_263.xxx" is used for modem code 113112.	
	3> "v2k7ge_b_263.xxx" is used for modem code 131812. (Standard)	
	4> "v2k7ge_b3_263.xxx" is used for modem code 1311302.
           (Recommanded for Germany)

[New Functions]

- Add True IP DMZ function.
- Support Annex M (modem code MUST be 121201 or later).
- Support G.lite (for modem code 1401201 only).
- Add two new adsl Telnet commands.
  a. "adsl showbins" to show dsl bits per bin(tone) information.
  b. "adsl optn dual on/off" to enable/disable dual-latency (modem code MUST be
     131701 or later).
- Add more wireless messages on syslog.
- Add DSL Annex Info on WUI.


[Improvements & Corrected Problems]

- Allow dynamic ip client to dial-in without default dial-in preshared key if certificate is used.
- Improve the PPPoE interoperability.
- Improve the DDNS stability.
- Correct display of "path mode" and "dslam vendor information" on Telnet command "adsl status".
- Correct the issue that wireless client can't find AP after configuring WDS.




******************************************************************************************

    Release Notes for Vigor2700Ge/Vigor2700e

    Firmware Version    : 2.6.2.1 
    Release Date        : Auguest, 2, 2006

    Applied Models      : Vigor2700Ge, Vigor2700e

******************************************************************************************

[Release Firmware]

    (1)For Annex A Model,
        1> "v2k7ge_a_2621.xxx"  is used for modem code 121201.	(Standard)
        2> "v2k7ge_a1_2621.xxx" is used for modem code 113111.         
        3> "v2k7ge_a2_2621.xxx" is used for modem code 131701.
           (Recommanded for the UK)
	4> "v2k7ge_a3_2621.xxx" is used for modem code 1401201.
                 
    (2)For Annex B Model,
	1> "v2k7ge_b_2621.xxx"  is used for modem code 1211202.
	2> "v2k7ge_b1_2621.xxx" is used for modem code 113112.	
	3> "v2k7ge_b2_2621.xxx" is used for modem code 131812.	(Standard)
	4> "v2k7ge_b3_2621.xxx" is used for modem code 1311302.
           (Recommanded for Germany)
                 
[New Functions]

- True IP DMZ function.
- Add protection for "Configuration Backup / Restoration" to prevent loading wrong
  configuration.


[Improvements & Corrected Problems]

- Correct the problem of set default limit value but causing reset current session count.
- Correct the issue that firewall setting is unable to be restored when use "Configuration
  Backup / Restoration".

[END of FILE]