********************************************************************************************

Release Notes for Vigor2600Ge

Firmware Version : 2.5.a (3)
Release Date : 7 Aug, 2006

Applied Models : Vigor2600Ge (Module:3)
(The Module information in the bottom label of the machine.)
********************************************************************************************

[!! CHECK !!]

This firmware is only for the machine with "Module:3" on the back label. If the last
digit of Module information is not "3", DO NOT upgrade the firmware by using this version. 


[Release Firmware]

I. For Annex A Model,
1. "v26ea_3_25a.xxx" is used for modem code 42E2EA53. (Standard)
2. "v26ek_3_25a.xxx" is used for modem code 41E2BE2C.
(Recommended for UK, 2.5.a_UK (3))
3. "v26e0_3_25a.xxx" is used for modem code 43E2EAA1.
(Recommended for high dB users which are using 
ADSL extended line on UK, 2.5.a_UK2 (3))
4. "v26ec_3_25a.xxx" is used for modem code 40E2BE29.
(Recommended for Netherland, 2.5.a_H (3))
5. "v26ei_3_25a.xxx" is used for modem code 43E2EAD4.
(Recommended for Italy and Taiwan High Rate ADSL line, 2.5.a_I (3))
6. "v26ex_3_25a.xxx" is used for modem code 43E2EA9F.
(Recommended for G.Lite only, 2.5.a_X (3))
7. "v26en_3_25a.xxx" is used for modem code 44E2EA17.
(Try this if meet DSL sync issue, 2.5.a_N (3)) 

II. For Annex B Model,
1. "v26eb_3_25a.xxx" is used for modem code 40E3BE15. (Standard)
2. "v26eg_3_25a.xxx" is used for modem code 40E4BE96.
(2.5.a_G (3))
3. "v26ez_3_25a.xxx" is used for modem code 40E4BEA9.
(Recommanded for Czech, Greece and Slovakia, 2.5.a_Z (3))
4. "v26ey_3_25a.xxx" is used for modem code 41E4EA0B.
(Recommended for Germany, Portugal, 2.5.a_Y (3))


[Improvements & Corrected Problems]

1. Correct the issue that large ICMP packets cannot be passed.
2. Correct the issue that PPPoE client doesn't check MAC address for incomimg packets.
3. Improve the wireless related syslog message.
4. Improve the Odyssey utility WPA reliability.


[Hint]

1. How to find the Wireless Hardware Version:
In the "Wireless LAN Setup" > "Wireless Information" > "Firmware Version", the last
digit is the Wireless Hardware Version. For example, v1.2.8.16.04.2 means that the
wireless hardware version is 2.

2. If you have any ADSL on-line problem, please contact your service provider at first 
or get into web user interface ("Internet Access Setup" > "PPPoE/PPPoA" or "MPoA") to change 
the "Modulation" of "DSL Modem Settings" to "T1.413", then try again. Also, you can use 
the following Telnet commands to tune your router working with Globespan chipset DSLAM.

> adsl status Get DSLAM chipset verdor information
> adsl dslam gspn Set ADSL parameters compatible with the Globespan chipset DSLAM 
> adsl dslam default Set ADSL parameters to factory default settings 

[END OF FILE]