******************************************************************************************** Release Notes for Vigor2500V Series Firmware Version : v2.5.7 Release Date : December 29, 2004 Applied Models : Vigor2500V series ******************************************************************************************** Note : The RST file will clear out all existing router settings back to factory defaults. You must use the RST file if you are experience unusual results after upgrading with the ALL file. Do not then attempt to restore old settings from a backup file made with from previous firmware. After upgrading, please check that your web configurator shows the firmware version/build listed above. multi-PVC support shall be referred to ISP services. You are recommended not to use this portion if your ISP did not support multi-PVC. You are recommended to select "UBR" of QoS for internet Access if you only use one PVC to access internet. [release]: the same firmware for annex A and B 1> "v25vc257.xxx" is with Conexant modem code v3.27. ( recommended for annex A [POTS] ) 2> "v25vo257.xxx" is with Conexant modem code v3.20. ( recommended for annex B [ISDN], Netherlands, Spain, and so on ) ( For annex A, US, China ) 3> "v25va257.xxx" is with Conexant modem code v3.46. ( recommended for Germany ) ( Try this if you have sync problem on adsl. ) Notes: 1. Please select modulation to "MULTI" or "T1.413" when your adsl line was annex B ( ADSL Over ISDN) and it only can work with Alcatel ETSI Mode. 2. Please try to use modem code v3.20 if you meet sync problem. [1. New Features] - Add Dail-plan telnet command to support dail-plan utility. - Allow inputting DNS server in MPoA setting. [2. Enhancement] - Resolve the browsing problem from UPnP InternetGatewayDevice in My Network Places. - Enhance the DMZ setting for WAN IP Alias. - Increase priority for local service ( Ex. VPN, RADUIS ) and avoid the the port of service will be added in the Open port or DMZ setting. - Resolved VPN passthrough issue. - Improve handling malformed DNS packet or MX type DNS query. - Improve DMZ host under heavy traffic. - Improve L2TP performance. - Fix the problem which can't hang up a VoIP call to mobile phone for some ITSP. ******************************************************************************************** Release Notes for Vigor2500V Series Firmware Version : v2.5.6 ( first release for the product new launch) Release Date : September 16, 2004 Applied Models : Vigor2500V series ******************************************************************************************** [Introduction] The Vigor2500V series ADSL VoIP router is a new product family which includes Vigor2500V, and Vigor2500Vi model. This product family is based on same hardware architecture of the whole Vigor 2500 series router and we integrate VoIP function into the router. Benefits of Vigor2500V ADSL VoIP Router --ADSL router for sharing your Internet connection --Robust firewall to help protect your computers --Make/Receive Voice calls over your ADSL connection using a regular telephone handset --Integration with your existing phone line (POTS) with automatic failover during power cuts --Free Voice-over-IP phone calls to other VoIP users --Compatible with Windows & Mac OS For more details of the product information, please visit our websites on http://www.draytek.com/ [Release Firmware] the same firmware for annex A and B 1> "v25vc256.xxx" is with Conexant modem code v3.27. ( recommended for annex A [POTS] ) 2> "v25vo256.xxx" is with Conexant modem code v3.20. ( recommended for annex B [ISDN] users who stay in Portugal, the Netherlands, Spain, and so on. ) ( For annex A users who stay in China, Australia and the USA. ) 3> "v25va256.xxx" is with Conexant modem code v3.46. ( Try this if you have sync problem on adsl. ) Notes: 1. You have to upgrade "*.RST" firmware file once you face the booting problems after upgrading. After upgrade "*.RST" firmware file to the router, it will erase the existing settings of the router, and restore the factory default settings into the router. What is the timing to using "*.rst" file to upgrade your router? Once you failed to upgrade your router using "*.ALL" firmware file (normally use) several times, then we suggest you use "*.RST" firmware file to do the upgrade. 2. After upgrade the router successfully, you can make sure the upgraded firmware version is the one listed above from the router's web user interface. 3. Do not attempt to restore old settings from a configuration backup file downloaded from previous firmware version. 4. Please select modulation to "MULTI" or "T1.413" when your adsl line was annex B ( ADSL Over ISDN) and it only can work with Alcatel ETSI Mode. 5. Please try to use modem code v3.20/3.46 if you meet sync problem. [END oF FILE]