******************************************************************************************

Release Notes for 2200V series

Firmware Version : V2.6.2 (5)
Release Date : February 25, 2008

Applied Models : Vigor 2200G/VG with Module 5
(Check the bottom label of the device to find module information)

*******************************************************************************************
This firmware supports only Ralink wireless cards.

[Improvement and Correction]

1. Corrected a wireless schedule failure issue.
2. Corrected a DDNS malfunctioning issue in PPPoE mode.
3. Improved 2nd subnet routing functionality.
4. Improved UDP fragment handling.


******************************************************************************************

Release Notes for 2200V series

Firmware Version : v2.6.1 (5)
Release Date : July 5, 2007 

Applied Models : Vigor 2200G/VG with Module 5
(Check the bottom label of the device to find module information)

*******************************************************************************************

[Improvement and Correction]

1. Correct following VoIP issues:
1.1 VoIP can't register to SIP server when access Internet by PPPoE.
1.2 Improve the stability when the "OP Number" is illegal in Didit Map Setup.
1.3 Correct the PSTN Loop-through issue when openning the "Phone Setting >> Advanced" page.
1.4 Correct the damaged Phone Book issue when openning the "Phone Setting >> Advanced" page.

2. Correct an issue that the time schedule is ignored if the MAC address not in the list
and "Pass Traffic" in MAC Address Control not selected.

3. Improve the stability when using Telent command "show nat" and "srv nat status".

*******************************************************************************************

Release Notes for 2200V Series

Firmware Version 	: 2.6.0 (5)
Release Date 		: April 27 2007

Applied Models 		: Vigor 2200VG with Module 5
    			  (Check the bottom label of the device to find module information)

*******************************************************************************************

[Improvement and Correction]

1. Correct the PSTN Loop-through issue (when firmware upgrade to version 2.5.9).
2. Improve wireless interoperability.


******************************************************************************************

    Release Notes for Vigor2200V Series

    Firmware Version    : 2.5.9(5)
    Release Date        : March, 8, 2007

    Applied Models      : Vigor2200V, Vigor220VG

******************************************************************************************

[Release Firmware]
 Please ensure you download and use the latest router tools when upgrading the firmware.


[Improvement and Correction]

1. Expand the SIP account number from one to three.

2. Add VoIP supplementary function in Phone Settings: 
 2.1 Hotline
 2.2 Call Forwarding
 2.3 DND (Do Not Disturb)
 2.4 hide caller ID
 2.5 Call Waiting
 2.6 Call Transfer function 
*******************************************************************************************

Release Notes for 2200V/VG

Firmware Version : v2.5.8.1 (5)
Release Date : Oct.22 2006 

Applied Models : Vigor 2200V series


*******************************************************************************************
Please ensure you download and use the latest router tools when upgrading the firmware.

[Improvement and Correction]

1. This version "only" support Ralink (5) MiniPCI Card,base on 2.5.8.

2. improve Ralink wireless card performance.


*******************************************************************************************

Release Notes for 2200V/VG

Firmware Version : v2.5.8 (5)
Release Date : July.3 2006 

Applied Models : Vigor 2200V series


*******************************************************************************************
Please ensure you download and use the latest router tools when upgrading the firmware.

[Improvement and Correction]
1. This version "only" support Ralink (5) MiniPCI Card. 
2. correct WebUI issue.

*******************************************************************************************

Release Notes for 2200V/VG

Firmware Version : v2.5.7.3
Release Date : April.28 2006 

Applied Models : Vigor 2200V series

*******************************************************************************************
Please ensure you download and use the latest router tools when upgrading the firmware.

[Improvement and Correction]
1. Correct interoperability issue with Accor ISP in Germany.
2. Improve wireless stability.
3. correct sip message routing problem.


********************************************************************************************

Release Notes for Vigor2200 Series

Firmware Version : v2.5.7.2
Release Date : Apr. 4 2006

Applied Models : Vigor2200 Series

********************************************************************************************
Please ensure you download and use the latest router tools when upgrading the firmware.

[Supported Models]:

- Vigor 2200V/VG

[New Feature and Corrections]
- Support single codec function via telnet command.
- Improve wireless stability when connect multiple wireless clients.
- Improve DTMF type callerID for Denmark.
- Other minor issue corrections.


[END oF FILE]